Sony PS-LX3BT
The 2026 replacement for the PS-LX310BT, and the same idea done again with newer radio: one-button fully automatic belt drive, Bluetooth out with aptX and aptX Adaptive, a switchable built-in phono stage, USB out with three gain settings, an aluminum die-cast platter and a pivot-bearing aluminum tonearm. It connects to whatever you already own, which is still the whole point of this deck.
Strengths
- Bluetooth out pairs straight to a wireless speaker or headphones; aptX Adaptive supports Hi-Res wireless up to 96 kHz / 24-bit
- One-step auto start, stop and return, with a switchable phono EQ for wired setups
- Three-level gain select (−4 / 0 / +6 dB) to match the output to whatever is receiving it
- Aluminum die-cast platter and a precision pivot-bearing aluminum tonearm
Trade-offs
- Bluetooth trades some fidelity versus a wired connection
- Fixed cartridge tracking at 3.5 g; no counterweight, so the stylus is the only upgrade
- The stylus is a Sony part and Sony states other styluses are not supported — no Sony-branded replacement for it is sold on Amazon
- The RCA lead is permanently attached, and there is no ground terminal
- Sony publishes no wow-and-flutter or signal-to-noise figure for it
| Drive | Belt drive |
|---|---|
| Operation | Fully automatic (one-step start, stop, return) |
| Wireless | Bluetooth output — SBC, aptX, aptX Adaptive (Hi-Res wireless up to 96 kHz / 24-bit with an aptX Adaptive receiver) |
| Built-in preamp | Yes — switchable, with a rear phono/line selector |
| Gain select | Low (−4 dB) / Mid (0 dB) / High (+6 dB) |
| USB output | Type-B output port per Sony's spec sheet — but two hands-on reviews list none |
| Analog output | Captive RCA lead, standard (not gold-plated) jacks; no ground terminal |
| Cartridge | Moving magnet, factory-fitted; stylus pressure 3.5 ± 0.5 g; headshell not exchangeable |
| Tonearm | Aluminum alloy, precision pivot bearing; no counterweight |
| Platter | 11.65 in aluminum die-cast |
| Speeds | 33 1/3 and 45 RPM (7 in / 12 in size selector; 45 adapter included) |
| Wow & flutter | Not published |
| Signal-to-noise | Not published |
| Weight | Approx. 7 lb 11.5 oz (3.5 kg) |
Note. Bluetooth OUT (deck to speaker) is the useful direction here and what makes this deck so flexible; if you care most about sound, use the wired analog output into powered speakers instead. The PS-LX5BT above it adds a one-piece chassis and a higher-grade cartridge for about a hundred dollars more.
Specifications read from the manufacturer / product listing, on September 22, 2026. “Not published” means the maker does not state that figure.




